how can configure auronomous access point with WPA2 Preshared key

Answered Question
Jan 9th, 2010
User Badges:

I worked with WLC 4400 series and configured access points aironet  1140 and all work without any problems.but when I tried to configure stand alone access point I couldn't configure  AP with WPA or WPA2 preshared key and i could configure it with WEP I want some help here.

Correct Answer by Leo Laohoo about 7 years 2 months ago

Wi-Fi Protected Access 2 (WPA 2) Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml


Please rate when helpful or appropriate.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Leo Laohoo Sun, 01/10/2010 - 13:26
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Wi-Fi Protected Access 2 (WPA 2) Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml


Please rate when helpful or appropriate.

Leo Laohoo Mon, 01/11/2010 - 17:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Thanks for the rating.

Actions

This Discussion