ā01-09-2010 11:59 PM - edited ā07-03-2021 06:24 PM
I worked with WLC 4400 series and configured access points aironet 1140 and all work without any problems.but when I tried to configure stand alone access point I couldn't configure AP with WPA or WPA2 preshared key and i could configure it with WEP I want some help here.
Solved! Go to Solution.
ā01-10-2010 01:26 PM
Wi-Fi Protected Access 2 (WPA 2) Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml
Please rate when helpful or appropriate.
ā01-10-2010 01:26 PM
Wi-Fi Protected Access 2 (WPA 2) Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml
Please rate when helpful or appropriate.
ā01-11-2010 01:22 AM
thank you for your help
god bless you
ā01-11-2010 05:04 PM
Thanks for the rating.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide