CME: Force an IP Phone to dial to a specific voice-port

Answered Question
Jan 11th, 2010
User Badges:

Greetings,


How can I get an IP Phone to dial out using a specific voice-port or voice-ports?


Thanks,


David

Correct Answer by Brandon Buffin about 7 years 2 months ago

See the following link for an explanation and sample config.


http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml


Hope this helps.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
paolo bevilacqua Tue, 01/12/2010 - 04:04
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Add a dedicated DN for picking the desired line, and put it on dedicated lines button.

Then, use the "trunk" command in ephone-dn, and match that number in a pots DP with the desired port..

Actions

This Discussion