01-11-2010 05:11 PM - edited 03-15-2019 09:02 PM
Greetings,
How can I get an IP Phone to dial out using a specific voice-port or voice-ports?
Thanks,
David
Solved! Go to Solution.
01-12-2010 05:14 AM
See the following link for an explanation and sample config.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
Hope this helps.
Brandon
01-12-2010 04:04 AM
Add a dedicated DN for picking the desired line, and put it on dedicated lines button.
Then, use the "trunk" command in ephone-dn, and match that number in a pots DP with the desired port..
01-12-2010 05:14 AM
See the following link for an explanation and sample config.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide