https port-forwarding

Unanswered Question
Jan 12th, 2010
User Badges:

I am trying to https (443) port-forwarding.. tried below, but not working ;>(

static (inside,outside) tcp X.X.X.X https I.I.I.I https netmask 0 0
access-list inbound_filter permit tcp any host X.X.X.X eq https
clear xlate
wr m

what I missed? .. is there any difference method for doing https port-forwarding?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
trustcisco Tue, 01/12/2010 - 00:31
User Badges:

The configuration is correct.

Is the https service running on the server ?

Ganesh Hariharan Tue, 01/12/2010 - 01:46
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016


Check out the https services are running or not !!



sainair Tue, 01/12/2010 - 16:05
User Badges:


Is the access-list inbound_filter applied to the outside interface.

Check for the command: access-group inbound_filter in interface outside

If the above mentioned command is present with the configuration that you mentioned, then you need to check the https services on the server. Also, check if you see hit counts on the access-list.



Kureli Sankar Tue, 01/12/2010 - 16:34
User Badges:
  • Cisco Employee,

What is the IP address? Is it the interface IP address? If so you need to use the keyword "interface" and not IP address x.x.x.x.

If it is the interface then do you have asdm enabled on the same port? If so, this traffic is destined TO the box and not THROUGH the box.


winanjaya Tue, 01/12/2010 - 16:51
User Badges:

Hello all,

Thanks a lot!.. this already resolved.. the problem occurs because the http server not configured correctly..




This Discussion