NM-HDV2-2T1/E1 does not accept 120 channels with VWIC-2MFT-E1

Unanswered Question
Jan 12th, 2010
User Badges:

Hi everyone,

I need to have 120 channels on my CISCO2851.

I am using  NM-HDV2-2T1/E1 with two (2) built in E1 interfaces and one VWIC slot where I inserted a VWIC-2MFT-G703 to have a total of four (4) E1 interfaces.

The problem is that I can't create more than 60 time-slots channel for overall ports.
When trying to configure the VWIC-2MFT-G703 daughter card, I got the following message

Router(config-controller)#channel-group 1 timeslots 1-31
%Insufficient resources to create channel group
test(config-controller)#
*Jan 11 14:51:13.539: %HDLC32-4-NOHDLCCHANNEL: HDLC32 in slot 1: No HDLC channel available


It's precised on the NM-HDV2-2T1/E1  datasheet that  VWIC2-2MFT-G703 is supported and a maximum of 120 time-slots channel can be created

IOS used:
- c2800nm-advipservicesk9-mz.124-24.T2
- c2800nm-advipservicesk9-mz.124-11.XJ4
- c2800nm-advipservicesk9-mz.124-22.YB
- c2800nm-advipservicesk9-mz.124-22.T

Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content