cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1043
Views
0
Helpful
2
Replies

4500 Power supply question

octroncisco
Level 1
Level 1

Hello,

I've been reading this document:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801f3dd9.html

And I've seen that there are two “data only” power supplies (1000W and 1400W) that doesn't provide PoE. But the 1300W power supply can provide data and PoE. What is the difference between the 1300 and 1400 W power supplies? Does anybody know why can't the 1400 W provide PoE?

I suppose that the “data + PoE” power supply has two outputs, one to provide power to the chassis and the modules and another one to provide PoE, isn't it?

Thanks in advance,

1 Accepted Solution

Accepted Solutions

ansalaza
Level 1
Level 1

Here is some related information:

Variable Wattage—These power supplies automatically adjust the wattage to accommodate PoE and system power requirements.

1400 W DC—Supports up to 1400 W of system power and variable amounts of PoE, depending on the input feed to the power supply.

The Catalyst 4500 series switches support the following power supplies:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/pwr_envr.html#wp1035492

1400 Not available for PoE when used in Combined Mode:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/pwr_envr.html#wp1035642

HTH,

View solution in original post

2 Replies 2

ansalaza
Level 1
Level 1

Here is some related information:

Variable Wattage—These power supplies automatically adjust the wattage to accommodate PoE and system power requirements.

1400 W DC—Supports up to 1400 W of system power and variable amounts of PoE, depending on the input feed to the power supply.

The Catalyst 4500 series switches support the following power supplies:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/pwr_envr.html#wp1035492

1400 Not available for PoE when used in Combined Mode:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/pwr_envr.html#wp1035642

HTH,

Thank you very much for the info.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: