01-12-2010 09:50 AM - edited 03-04-2019 07:11 AM
hello,
i have done blow configuration on my router but still i m not accessing internet on my local system.
what i need more to change on my network.
ip name-server 20.20.200.59
ip name-server 21.20.200.1
ip route 0.0.0.0 0.0.0.0 45.45.45.1
interface FastEthernet0
ip address 192.168.200.1 255.255.255.0
ip nat access in
duplex auto
speed auto
!
interface FastEthernet1
ip address 45.45.45.49 255.255.255.192
ip nat access out
duplex auto
speed auto
ip nat pool INTERNET 192.168.200.1 192.168.200.255 netmask 255.255.255.0
ip nat inside source list 1 pool INTERNET overload
01-12-2010 10:25 AM
Where is you access-list 1? You should be able to add access-list 1 permit 192.168.200.0 0.0.0.255 and that should fix the issue. If not please post your running config.
01-12-2010 11:16 PM
Hi ,
Configure ip nat inside at interface FastEthernet0 and ip nat outside at interface FastEthernet1
HTH
Regards
Ganesh.H
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: