Hello everybody, anybody here has ever configured 802.1x and WOL?
I have this configuration:
switchport access vlan 5
switchport mode access
no logging event link-status
authentication control-direction in
authentication event fail retry 1 action authorize vlan 301
authentication event no-response action authorize vlan 301
authentication order dot1x
authentication port-control auto
authentication violation protect
no snmp trap link-status
dot1x pae authenticator
dot1x timeout quiet-period 5
dot1x timeout tx-period 20
dot1x timeout supp-timeout 10
storm-control broadcast level 30.00 15.00
storm-control action shutdown
storm-control action trap
spanning-tree bpduguard enable
ip dhcp snooping limit rate 30
dot1x is working but I can't get WOL to work. What is even stranger is that with "authentication control-direction in" the interface becomes up/up even if the device is shut down and it puts the interface in VLAN 301instead of leaving it in VLAN 5. I can live with that but I don't understand the up/up and WOL not working.
If anyone has an idea or pointers that would be greatly appreciated.