Solved: Exclude a vlan from IP ROUTING layer 3 switch

Jason Whitehead · ‎01-12-2010

I have set up a Layer 3 switch to do IP routing between the VLANS, There are a couple of VLANS that I do not want communicating with the other VLANS,

What is the best way to accomplish this, ACLS?

Jon Marshall · ‎01-12-2010

JasonWhitehead wrote:

The vlans I want to exclude only need to talk to the devices on the same VLAN and use the internet out of the default route

Jason

Well then yes, ACLs are the way to go eg.

vlan 10 is one of your isolated vlans = 192.168.10.0/24

vlan 5, 6, 7 are vlans you don't want vlan 10 communicating with

access-list 101 deny ip 192.168.10.0 0.0.0.255

access-list 101 permit ip 192.168.10.0 0.0.0.255 any <-- this line for internet access

int vlan 10

ip access-group 101 in

Jon

Jon Marshall · ‎01-12-2010

JasonWhitehead wrote:

I have set up a Layer 3 switch to do IP routing between the VLANS, There are a couple of VLANS that I do not want communicating with the other VLANS,

What is the best way to accomplish this, ACLS?

Jason

Yes you can use ACLs on the L3 interfaces. Do these vlans you want to isolate need to talk to anything other than devices on their own vlans ?

Jon

Jason Whitehead · ‎01-12-2010

The vlans I want to exclude only need to talk to the devices on the same VLAN and use the internet out of the default route

Jon Marshall · ‎01-12-2010

JasonWhitehead wrote:

The vlans I want to exclude only need to talk to the devices on the same VLAN and use the internet out of the default route

Jason

Well then yes, ACLs are the way to go eg.

vlan 10 is one of your isolated vlans = 192.168.10.0/24

vlan 5, 6, 7 are vlans you don't want vlan 10 communicating with

access-list 101 deny ip 192.168.10.0 0.0.0.255

access-list 101 permit ip 192.168.10.0 0.0.0.255 any <-- this line for internet access

int vlan 10

ip access-group 101 in

Jon

Jason Whitehead · ‎01-12-2010

Thank you so much, It is ridiculous how fast the respond time is on these forums, nothing but help here