same etherchannel grouping on different switch

Unanswered Question
Jan 12th, 2010
User Badges:

Can i configure etherchannel and group each respective port on different switches as an etherchannel group ?


Example : 2 C2960 switch separately connected to a C3750


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Tue, 01/12/2010 - 21:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

No.

kokhong.chew Wed, 01/13/2010 - 17:15
User Badges:

Can configure etherchannel on switchport access mode without vlan tagging ? ?

Jerry Ye Wed, 01/13/2010 - 17:38
User Badges:
  • Cisco Employee,

Do you mean configure the etherchannel as access port with no vlan tag?


Yes, you can do the following on the etherchannel (PO)


switchport mode access

switchport access vlan xyz


Regards,

jerry

kokhong.chew Wed, 01/13/2010 - 17:44
User Badges:

Jerry



only this command "switchport mode access"

without this command "switchport access vlan xyz"


something like trunk mode

Jerry Ye Wed, 01/13/2010 - 17:45
User Badges:
  • Cisco Employee,

Then the untagged vlan will be vlan 1 and this is the default.


Regards,

jerry

Actions

This Discussion