Cisco 2811 Router Not Booting

Unanswered Question
Jan 13th, 2010

Hi

cisco 2811 router not booting.its produce following error

System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

*** Emulating mis-aligned load at 0xe8ce3702       
Copyright (c) 2005 by cisco Systems, Inc.C = 0xbfc0a808 ... failed, opcode = 0x2b

Initializing memory for ECC

         
.

program load complete, entry point: 0x8000f000, size: 0xc940

*** Emulating mis-aligned loa

System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)a808 ...
failed, opcode = 0x2b02                                      
Copyright (c) 2005 by cisco Systems, Inc.e8ce3702b                              

Initializing memory for ECC08 ... failed, opcode = 0x2
.2
c2811 processor with 262144 Kbytes of main memorymulating mis-aligned load at
0xe8ce3702b        
Main memory is configured to 64 bit mode with ECC enabled failed, opcode = 0x2b02


Readonly ROMMON initializedaligned load at 0xe8ce3702b
program load complete, entry point: 0    
                            
*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702                      
  
    PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b

*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702                      
  
    PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b

*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702                      
  
    PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b

*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702                      
  
    PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b

    PC = 0xbfc0a808 ... failed, opcode = 0x2b02

*** Emulating mis-aligned load at 0xe8ce3702b                                      
  
    PC = 0xbfc0a808 ... failed, opcode = 0x2b02

*** Emulating mis-aligned load at 0xe8ce3702b                                      
  
    PC = 0xbfc0a808 ... failed, opcode = 0x2b02

Please help me to resolve this issue

thanks in advance

Mohana sundaram.S

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Wed, 01/13/2010 - 13:36

Gee whiz!  I've never seen a bootstrap with THAT version.

Please contact Cisco TAC and raise an RMA request.  The bootstrap has "boned" itself.

Actions

This Discussion