Cisco 2811 Router Not Booting

smohanasundaram · ‎01-13-2010

Hi

cisco 2811 router not booting.its produce following error

System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

*** Emulating mis-aligned load at 0xe8ce3702
Copyright (c) 2005 by cisco Systems, Inc.C = 0xbfc0a808 ... failed, opcode = 0x2b

Initializing memory for ECC

.

program load complete, entry point: 0x8000f000, size: 0xc940

*** Emulating mis-aligned loa

System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)a808 ...
failed, opcode = 0x2b02
Copyright (c) 2005 by cisco Systems, Inc.e8ce3702b

Initializing memory for ECC08 ... failed, opcode = 0x2
.2
c2811 processor with 262144 Kbytes of main memorymulating mis-aligned load at
0xe8ce3702b
Main memory is configured to 64 bit mode with ECC enabled failed, opcode = 0x2b02

Readonly ROMMON initializedaligned load at 0xe8ce3702b
program load complete, entry point: 0

*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702

    PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b

*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702

    PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b

PC = 0xbfc0a808 ... failed, opcode = 0x2b02

*** Emulating mis-aligned load at 0xe8ce3702b

    PC = 0xbfc0a808 ... failed, opcode = 0x2b02

Please help me to resolve this issue

thanks in advance

Mohana sundaram.S

Leo Laohoo · ‎01-13-2010

Gee whiz! I've never seen a bootstrap with THAT version.

Please contact Cisco TAC and raise an RMA request. The bootstrap has "boned" itself.