01-13-2010 11:11 AM
Hi folks,
I'm curious if there's a way to configure RRI into an OSPF process for VPN connections done via AnyConnect (SSL VPN). I thought it could be done similar to IPSec and configure it by adding "reverse-route" statement into a crypto map but it appears it won't work that way. Any ideas ?
Thanks, Eugene
02-16-2011 05:47 AM
Hi Eugene
You need ocnfigure IP pool for SSL, once remote user connect to ASA successful, it will automatically generate one host static route.
You may set OSPF policy to redistribute it to IGP. Once the user disconnect, the host static will disappear.
S 192.168.1.149 255.255.255.255 [1/0] via "internet gateway", outside
Jeffery
04-08-2013 08:18 PM
Hi Jeffery
Do you know if there is a way to summarize the host routes before advertising into OSPF?
Thanks,
Ernst
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: