Solved: Understanding Node ID: on CUCM 7

cisco_admin1 · ‎01-14-2010

hi there,

I have noticed the following in the applogs from RTMT from a CUCM (Pub) in the cluster

Remote Node ID:4 Remote Application ID:100

Whilst http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/err_msgs/7_x/ccmalarms701.html show what the application ID is, I still cannot work out what the remote node is.

The logs are very long, but here is a snapshot:

Oct 31 13:03:14, LDSCMPUB01, Error, Cisco CallManager, : 1531: Oct 31 13:03:14.238 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-SDLLinkAppProtocol: SDL Link Connection Refused. Remote Application Link Protocol Version:7.1.2.20000-2 Local Application Link Protocol Version:7.1.2.21900-5 Remote Node ID:3 Remote Application ID:200 Remote Application Version: Cluster ID:StandAloneCluster Node ID:LDSCMPUB01, 1705
Oct 31 13:03:14, LDSCMPUB01, Error, Cisco CallManager, : 1532: Oct 31 13:03:14.288 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-SDLLinkAppProtocol: SDL Link Connection Refused. Remote Application Link Protocol Version:7.1.2.20000-2 Local Application Link Protocol Version:7.1.2.21900-5 Remote Node ID:3 Remote Application ID:100 Remote Application Version:CUCM AppVersion=7.1.2.20000-2 Cluster ID:StandAloneCluster Node ID:LDSCMPUB01, 1706
Oct 31 13:03:24, LDSCMPUB01, Error, Cisco CallManager, : 1533: Oct 31 13:03:24.586 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-SDLLinkAppProtocol: SDL Link Connection Refused. Remote Application Link Protocol Version:7.1.2.20000-2 Local Application Link Protocol Version:7.1.2.21900-5 Remote Node ID:4 Remote Application ID:200 Remote Application Version: Cluster ID:StandAloneCluster Node ID:LDSCMPUB01, 1707

any advice would be great,

Jaime Valencia · ‎01-14-2010

Go to the CUCM server page, click on each server and you'll see the node id on top of the page

They get one as they're installed, PUB has 1, 1st SUB gets 2 and so on.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎01-14-2010

Yes, that's the one

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Adrian Saavedra · ‎01-14-2010

Yes.

View solution in original post

Jaime Valencia · ‎01-14-2010

Go to the CUCM server page, click on each server and you'll see the node id on top of the page

They get one as they're installed, PUB has 1, 1st SUB gets 2 and so on.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Report Inappropriate Content · ‎01-14-2010

Many thanks to the very quick reply!!

i am assuming it is the

CTI ID

1

listed in the Cisco Unified CM Configuration page?

Jaime Valencia · ‎01-14-2010

Yes, that's the one

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Adrian Saavedra · ‎01-14-2010

Yes.

JanManekSW · ‎05-10-2012

Hello,

is it possible to get the CUCM cluster NodeId via SNMP?

Thanks, JM.

ionel · ‎02-15-2018

Node ID

From cli:

run sql select * from callmanager