C3750 - show Boot

Unanswered Question
Jan 15th, 2010

Which image will load on the Cisco 3750 switch.

Server-SW_A#show boot
BOOT path-list      : flash:c3750e-universalk9-mz.122-44.SE.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :
Timeout for Config
          Download:    0 seconds
Config Download
       via DHCP:       disabled (next boot: disabled)
-------------------
Switch 1
-------------------
BOOT path-list      : flash:c3750e-universal-mz.122-44.SE1.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :

Auto upgrade        : no
Auto upgrade path   :
Server-SW_A#

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Sat, 01/16/2010 - 04:43

Hi,

The following output shows  Cisco 3750 switch stack comprised of two switches if yes then both switches show they are booting from flash:

If you want to change the path use the following command in switches

switch(config)#boot system switch all flash:c3750-ipbasek9-mz.122-37.SE.bin


Hope that helps out your query !!

If helpful do rate the valuable post.

Regards
Ganesh.H

Actions

This Discussion