Stacking a 3750G

Unanswered Question
Jan 15th, 2010
User Badges:

Hello,


I am going to be stacking a new 24 port C3750GTS switch with another of the same model. I have done this before and I have set the priority of the current live switch to 5 and I will provision the 2 switch before or after I use the stack cable.  I have a couple of questions:


1.) Both the new and older switch are running IOS 12.2(35)SE5 - C3750-IPBASE-M, is it worth upgrading or leave them as they are?

2.) Do both switches have t use the same IOS version? or Image?

3.) I have read you can stack different models togther, which I didn't think possible and I can't find a link for what can be stacked with what, does anyone have a link?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kareem.afifi Fri, 01/15/2010 - 06:03
User Badges:

1) Yes I say it's def. worth upgrading to the latest IOS. Probably corrected bugs from the older version


2) Yes they both must be running the same IOS/Image


3) Not a 100 percent sure on this. You are probably better off opening a ticket to find out.

Andy White Fri, 01/15/2010 - 06:59
User Badges:

Thanks all, what IOS image would you suggest, there are now so many!


15

12.4

12.3

12.2


and within these there are T, Mainline, Special.


I guess I just need the latest IPbase?


IP BASE W/O CRYPTO
c3750-ipbase-mz.122-53.SE.bin
Release Date: 15/Dec/2009
Size: 10358.11 KB  (10606703 bytes)
Minimum Memory: DRAM:128 MB  Flash:16 MB

Or


IP BASE W/O CRYPTO WITH WEB BASED DEV MGR
c3750-ipbase-tar.122-53.SE.tar
Release Date: 15/Dec/2009
Size: 13270.00 KB  (13588480 bytes)
Minimum Memory: DRAM:128 MB  Flash:16 MB


My switch info:


#sh flash


Directory of flash:/


    2  -rwx        1295   Mar 1 1993 00:02:10 +00:00  config.text
    3  -rwx           5   Mar 1 1993 00:02:10 +00:00  private-config.text
    5  drwx         192   Mar 1 1993 00:06:31 +00:00  c3750-ipbase-mz.122-35.SE5


15998976 bytes total (6369280 bytes free)


#dir flash:c3750-ipbase-mz.122-35.SE5
Directory of flash:/c3750-ipbase-mz.122-35.SE5/


    6  -rwx     7175078   Mar 1 1993 00:05:31 +00:00  c3750-ipbase-mz.122-35.SE5.bin
    7  drwx        4224   Mar 1 1993 00:05:54 +00:00  html
  508  -rwx         598   Mar 1 1993 00:06:31 +00:00  info


15998976 bytes total (6369280 bytes free)

Reza Sharifi Fri, 01/15/2010 - 08:30
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Andy,


12.2(53) is latest on CCO now. Here is the IP based image name:


c3750-ipbase-mz.122-53.SE.bin


HTH

Reza

krishnakumarr Fri, 01/15/2010 - 06:37
User Badges:

Hi


Both the switches should be same image.


we can connect 3750 3750G 3750E series also into the same stack


What ever the image is running in the master switch the same image will push into the member switches automatically when u add the switches into the stacks , if it is not happend we need to upgrade the image manually



Attaching stacking doc


regards

krishna kumar

Actions

This Discussion