Cisco IOS Image 12.2(25)EZ for etherswitch module for 2821 router

Answered Question
Jan 15th, 2010

Dear Netpros,


I am searching the cisco site to download this image for the 2821 router to resolve the IPT POE issue but I can not find anywhere in the site.

I did login using CCO ID provided. The etherswitch NM pre-requisites shows that we have to use this 12.2(25)EZ image for the switch module to provide POE to the IP Phones.


Arumugam.

I have this problem too.
0 votes
Correct Answer by krishnakumarr about 6 years 10 months ago

Hi

Can you provide me the part number for ether switch module and current show ver on 2821 router

regards

krishna

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
krishnakumarr Sat, 01/16/2010 - 03:57

Hi

Can you provide me the part number for ether switch module and current show ver on 2821 router

regards

krishna

arumugasamy Sat, 01/16/2010 - 12:09

Kumar,

The part of the module is

NME-X-23ES-1G-P

I attached the sh ver of Host Router as below and also at the end attached the sh ver for the etherswitch module.

------------------ show version ------------------

Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(22)YB4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 07-Aug-09 14:42 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

R1BAHRAINz uptime is 3 days, 20 hours, 35 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.124-22.YB4.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 2821 (revision 53.51) with 243712K/18432K bytes of memory.
Processor board ID FHK1249F1ZY
3 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

---------------------------------------------------------------------------------------------------------------------------------------------------

The below attached is the sh ver of Etherswitch module

------------------ show version ------------------

Cisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 28-Jul-06 08:46 by yenanh
Image text-base: 0x00003000, data-base: 0x00EE3E54

ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)EZ, RELEASE SOFTWARE (fc1)

S1BAHRAINz uptime is 1 day, 23 hours, 22 minutes
System returned to ROM by power-on
System restarted at 18:34:20 UTC Thu Apr 20 1905
System image file is "flash:c3750-ipbase-mz.122-25.SEE2/c3750-ipbase-mz.122-25.SEE2.bin"

cisco NME-X-23ES-1G-P (PowerPC405) processor (revision 3.0) with 118784K/12280K bytes of memory.
Processor board ID FOC11131CZ5
Last reset from power-on
1 Virtual Ethernet interface
23 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:1B:54:BB:15:00
Motherboard serial number       : FOC11131CZ5
Model revision number           : 3.0
System serial number            : FOC11131CZ5
Top Assembly Part Number        : 800-25011-01
Top Assembly Revision Number    : N/A
Version ID                      : V01
Hardware Board Revision Number  : 0x00


Switch   Ports  Model              SW Version              SW Image           
------   -----  -----              ----------              ----------         
*    1   25     NME-X-23ES-1G-P    12.2(25)SEE2            C3750-IPBASE-M    

Actions

This Discussion