01-17-2010 08:34 PM - edited 03-06-2019 09:19 AM
Is "GLC-FE-100LX' transceiver compatible with this specific switch - "WS-C2960G-24TC-L" ?
Solved! Go to Solution.
01-17-2010 08:52 PM
Hi
It is compataible
Hope I answered ypur question
pl find ref guide
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/product_data_sheet0900aecd80322c0c.html
regards
krishna kumar
View solution in original post
01-17-2010 10:07 PM
Hello Kenx,
according to 100 Mbps GBIC compatibility matrix
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL632702.html
WS-C2960-24TC-LWS-C2960-48TC-LWS-C2960G-24TC-L
GLC-GE-100FXGLC-FE-100FXGLC-FE-100LXGLC-FE-100BX-DGLC-FE-100BX-U
—
12.2(25)FX
you need at least an IOS image 12.2(25)FX or later version on your switch
Hope to help
Giuseppe
01-17-2010 10:28 PM
Hi,
Check out the below link the transceiver is compatible with different version of the switches hope that clear out your query.
http://www.ciscosystems.co.nz/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml
If helpful do rate the valuable post.
Regards
Ganesh.H
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
