Please, anyone help!
I've been beating my head against this problem and doesn't seem the obvious reason why it doesn't work.
1841 router running C1841-ADVSECURITYK9-M), Version 12.4(24)T is configured for SSL VPN. My web portal seems to be entirely OK but when I click on launching SVC it starts, but no prompt for username/password is seen. In the status line of AnyConnect Client I see "Unable to process response from x.x.x.x"
This is the portion of the config responsible for clientless and client based VPN access:
webvpn gateway WEBVPN
ip address x.x.x.x port 8080
ssl trustpoint TP-self-signed-2993568318
webvpn install svc flash:/webvpn/anyconnect-win-2.4.0202-k9.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context WEBVPN_CNTXT
logo file flash:/webvpn/logo_for_portal.jpg
ssl authenticate verify all
nbns-server 192.168.1.10 master
login-message "Welcome to our web portal"
url-text "General on Arthur" url-value "//Arthur/General"
policy group WEBVPN_POL
banner "There's no expectation of privacy. All access is closely monitored"
timeout idle 1800
timeout session 36000
svc address-pool "SSLVPN_POOL"
svc dpd-interval gateway 30
svc rekey method new-tunnel
svc dns-server primary 192.168.1.10
aaa authentication list VPNUSERAUTHEN
aaa authentication login VPNUSERAUTHEN group radius
ip local pool SSLVPN_POOL 192.168.11.1 192.168.11.10
I tried aaa authentication both radius and local but to no avail.