I bought this AP (http://www.cisco.com/en/US/products/ps10052/index.html) to get acceptable speed when accessing my servers.
I configured the device, installed an N standard wifi card in my PC.
Signal strenght is excellent, it says 130Mbit/s.
When I tested the real throughput with IPERF I got only max 40Mbit/s and this is unacceptable for me. The AP is connected on a 2960 100Mbits switch.
Over copper I get 90Mbit/s.
What can I do to get speed near the 90Mbit/s?