Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Aironet 1140 and 1250 series WLAN solution

Unanswered Question

Good day,

I am looking for a wireless solution to be intergrated into an existing LAN.  It is a 3 story building with many wall and segregations seperating rooms etc.  I want to enable wireless capability throughout the building.  I was looking at the Aironet 1250 anf 1140 series as possible soltuions. I looked at the directional and omnidirectional antennas options. Should I get like one 1250 with omnidirectional antennas for whereever has the most clients and rooms closely together and 1140's with directional (hallways and similar etc)  and omnidirectional (other floos and scattered rooms) respectively.  Also I want to use one SSID throughout. Is this possible and does it need to be configure on both clients and AP's or only on AP's. I want clients to connect seamlessly wherever they are in the building.  Is this solution good? Any advice is welcomed. Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Leo Laohoo Mon, 01/18/2010 - 13:19
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Kindly refrain from making multiple post.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode