01-18-2010 01:00 PM
Hey guys!
I need the basic information to form a L2L ipsec tunnel. If one of you all could send me a config, i can tweak when i get it with transform sets. I want to stay away from the wizards.
I have an ASA 5520 going to connect to a PIX. help!
thanks!
01-18-2010 02:07 PM
Follow this basic example
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080950890.shtml
Other L2L examples found here
http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html
Lastly reference this to help you understand Ipsec components
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a0080094203.shtml
01-19-2010 11:13 AM
THank you.
However i am still having a tough time with this... here is what i hope you can help me with...
I am using a ASA 5520
my host 172.16.108.10
my outside network 216.100.100.100
their peer ip 10.155.35.65
their outside network 216.100.100.101
i want to use AES 256 encryption
the rest can be the default....
can you give me the commands please? the security thing isnt my thing...
help!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: