870 series routers

Unanswered Question
Jan 19th, 2010

Hello,

Can anyone explain what happens when you install advance IP services IOS on a 870 series router that has 24MB of flash memory...

The documentation states that you need 28MB of flash memory on 870 series router to install advance IP services IOS,

however,

the advance IP services IOS size is less than 24MB so you have no problem installing it on your router.

I have tried some simple configurations on such a router without it being connected to a ADSL line and I could not find anything wrong

with the router...

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Tue, 01/19/2010 - 12:57

Hi Marko,

It ain't the config you should watch out for.  When the router boots up, it will try to read the IOS.  The IOS will "expand" and, like cooking yeast, when the IOS finds out it can't be accomodate in the flash provided the router will stop the boot and sometimes with an error that the firmware is "corrupt".

marko.bozicevic Wed, 01/20/2010 - 00:50

Hi Leolaohoo,

That is exactly what I expected to happen,that the router will end up in rommon or something but every time it booted

successfuly...without errors.That is what is confusing me.

Here is the output of the show version:

_______________________________________________________________________________________________________________

Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(11)T2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 01-May-07 09:03 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE

Router uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c870-advipservicesk9-mz.124-11.T2.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco 878 (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memory.
Processor board ID FCZ1141R4RN
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ISDN Basic Rate interface
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Intel Strataflash)

Configuration register is 0x2102

_______________________________________________________________________________________________________________

and the show flash:

_______________________________________________________________________________________________________________

Router#sh flash:
24576K bytes of processor board System flash (Intel Strataflash)

Directory of flash:/

    2  -rwx    17227284   --- -- ---- --:--:-- -----  c870-advipservicesk9-mz.124-11.T2.bin

23482368 bytes total (6250496 bytes free)ž

_______________________________________________________________________________________________________________

The router seems to boot normaly every time...

Regards

Actions

This Discussion

Related Content