01-19-2010 07:23 AM
How to configuration static LSP on simple MPLS network?
Solved! Go to Solution.
01-19-2010 08:05 AM
Hello Tang,
if you are interested in static label to IPv4 mappings see the following
http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_m2.html#wp1060671
Hope to help
Giuseppe
01-19-2010 08:05 AM
Hello Tang,
if you are interested in static label to IPv4 mappings see the following
http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_m2.html#wp1060671
Hope to help
Giuseppe
01-19-2010 07:24 PM
Great! Thanks for your reply!
Good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide