Scripting & Nexus5000

Unanswered Question
Jan 20th, 2010

Hi all,


Does the Nexus5000 support any kind of scripting (ie. EEM or some other UNIX shells maybe?)

Is it on the roadmap for some future version ?


regards,

Geert

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gnijs Sun, 01/24/2010 - 05:11

Seems to be only Nexus7000. Nexus 5000 does not show any eem information.

gnijs Sun, 01/24/2010 - 15:52

mmm...no success:


XXXXX(config)#  event ?

                         ^
% Invalid command at '^' marker.
?
                         ^
% Invalid command at '^' marker.
XXXXX(config)# event manager ?
                         ^
% Invalid command at '^' marker.
?
                         ^
% Invalid command at '^' marker.
XXXX(config)# event manager applet ?
                         ^
% Invalid command at '^' marker.
?
                         ^
% Invalid command at '^' marker.
XXXXX(config)# event manager applet



Running version 4.1(3)N2(1a) with the following features enabled:


Software
  BIOS:      version 1.3.0
  loader:    version N/A
  kickstart: version 4.1(3)N2(1a)
  system:    version 4.1(3)N2(1a)
  power-seq: version v1.2
  BIOS compile time:       09/08/09


sh feature
Feature Name          Instance  State  
--------------------  --------  --------
fcsp                  1         disabled
tacacs                1         enabled
fc-port-security      1         disabled
fabric-binding        1         disabled
port_track            1         enabled
npiv                  1         disabled
lacp                  1         enabled
npv                   1         disabled
interface-vlan        1         enabled
private-vlan          1         disabled
udld                  1         enabled
vpc                   1         enabled
cimserver             1         disabled
fcoe                  1         enabled
fex                   1         enabled

Joe Clarke Sun, 01/24/2010 - 18:15

Further research has led me to believe that the Fabric Manager blurb may be wrong, and EEM is not on the N5K.  I am checking with the product team to be sure.

Joe Clarke Thu, 01/28/2010 - 06:56

I have confirmed the N5K does not yet support EEM.  Support is being planned for a future release, however.  The documentation on Cisco.com has now been corrected.

Actions

This Discussion