2801 can not detect VIC3-2FXS card.

lveraza2010 · ‎01-20-2010

Hi,

I have the 2801 router with a VIC3-2FXS card that is not detecting, I see it with sh diag command like Unkown WAN card.

The IOS that I´m using is:

Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)

System image file is "flash:c2801-spservicesk9-mz.124-15.T7.bin"

I checked the details and It can support it.

Do you have any idea what I can do ?.

Thank you, best regards.

Leo Laohoo · ‎01-20-2010

For the 12.4(15), you need the Release 12.4(15)XZ with IP Voice feature set.

Note: Please refer to the Cisco IOS Software release notes for determining the minimum flash and dynamic RAM (DRAM) requirements.

lveraza2010 · ‎01-20-2010

Thank you by your support.

Do you know If I can use next IOS:

c2801-ipvoicek9-mz.124-24.T2.bin
Release Date: 22/Oct/2009
Size: 39192.34 KB (40132948 bytes)
Minimum Memory: DRAM:192 MB Flash:64 MB

Thank you, best regards.

Leo Laohoo · ‎01-20-2010

12.4(24)T2 should be fine.