ASA - no logging msg 106100 for matching ACEs

Unanswered Question
Jan 21st, 2010
User Badges:

Hello all,

At monitoring, real-time log viewer, loggin level debugging, and syslog also, I can't see the message 106100, which each Acess List Entry should generate when there is a match. Some times are generated, but 99% most of the time aren't.

I can see the hit count increasing, but 106100 msgs are not generated. I have logging of each ACE at the default level.

Other messages like 302013,302014 are always generated.

this is my loggin settings


Syslog logging: enabled
    Facility: 20
    Timestamp logging: disabled
    Standby logging: enabled
    Debug-trace logging: disabled
    Console logging: disabled
    Monitor logging: disabled
    Buffer logging: level debugging, 27517332 messages logged
    Trap logging: level informational, facility 20, 23033795 messages logged
        Logging to inside server errors: 221  dropped: 64276
    History logging: disabled
    Device ID: disabled
    Mail logging: disabled
    ASDM logging: level informational, 23033795 messages logged

Any ideas?

thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
clarbulp Tue, 02/02/2010 - 13:34
User Badges:

You didn't say what version of the code you are running - but if if is 8.2.1, there's a known bug CSCsz73284 that may explain your problem.


It's officially fixed (per Cisco) in 8.2.1.12


Hope this helps,


Paul



Actions

This Discussion