I've got a situation where a client has an ASA5510 Pix with a switch behind the internal interface. The switch has only vlan 1, but now wants to create a 2nd vlan on the switch for a new server.
How would I accomplish this? I can't trunk on the interface to the PIX, so how would I get them access to the new vlan.
Yes, you would need short outage window to do it
I'll have to remove the ip address on the current interface then create a sub for it as well, no? The client is concerned about down time, but I'm assuming there will be some while I turn on trunking on the switch as well.
Thanks for your help.
Yes you can't do this without some downtime for both the ASA and the switch.
You can create a sub-interface on the ASA for each vlan
ip address 172.16.8.1 255.255.255.0
ip address 172.16.9.1 255.255.255.0