01-21-2010 07:33 PM
Im running vrf-lite and our dhcp server see only 0.0.0.0. Im able to ping vlan10, and see the dhcp request. Running on a 2811. I have limited access to device. Do I need to turn on Dhcp-relay? Verifing ip forward-protocol. Do i need to add " vrf WISP to my helper-address? The interface it sends Dhcp request is also within the vrf. The dhcp scope is part of Vlan10 subnet
int vlan 10
ip vrf forward WISP
ip add x.x.x.x s.s.s.192
ip helper-address x.x.x.x
01-22-2010 09:43 AM
Hello James,
the DHCP server is in the same VRF?
Hope to help
Giuseppe
01-22-2010 11:10 AM
Yes and no. It uses another interface thats within the same vrf Wisp. On the other end of the vrf it is forwarded to our global dhcp server. in bold is where the unicast packet are going using the defaultroute
int fast0/0.1
encap dot1q 1
ip vrf forwarding WISP
ip add 172.16.6.2 255.255.255.252
!
int vlan 10
ip vrf forward WISP
ip add 66.223.195.129 255.255.255.192
ip helper-address 208.138.129.49
!
ip route vrf WISP 0.0.0.0 0.0.0.0 172.16.6.1
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: