CallManager Station Specific Authorization Code

Unanswered Question
Jaime Valencia Sat, 01/23/2010 - 22:40
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

CUCM has FAC and CMC, not sure if that's what you want

The Features And Services guide available on CCO has all the info on those features


HTH


java


if this helps, please rate


www.cisco.com/go/pdihelpdesk

Jonathan Schulenberg Sun, 01/24/2010 - 07:37
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

You don't. Any FAC or CMC code is valid on any route pattern that requires it; they are not device-specific.

emorivera2526 Sun, 01/24/2010 - 07:55
User Badges:

Hunt,


You can do this by following Java's recommendation, but here's a little more detail (all on CCO):


Create a new partition

create a new CSS

assign new CSS to station that you want to use FAC on

copy existing route pattern, assign to new PT


This should give yout he desired result, but a little more work is involved


HTH


Emilio

Rob Huffman Sun, 01/24/2010 - 08:35
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Hunt,


Just to add a little more to the great info from Java,Jonathan and Emilio


We used to use Station Specific Auth Codes on our Nortel Meridian TDM

system. When we moved to CUCM we realised that this feature was not available.

We have not found this to be a big issue, as Auth Codes are generally used for

Billing restriction purposes. Because Toll calls are billed against the FAC code

when used, the overall functionality has basically remained the same.


Cheers!

Rob

Actions

This Discussion