External number speed dial on SPA500S - 525G

Unanswered Question
Jan 25th, 2010
User Badges:


I do not fond the way to program an external number (let's say 02-12-34-56-78) to a speed dial button on a SPA500S extension of a SPA525G ?

I am using v8 UC520.

Could you please post CLI commands as example ?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gondange1 Mon, 01/25/2010 - 11:24
User Badges:

OK thanks Steven, but how to attach these speed dials to button on the SPA500S ?

Steven Smith Mon, 01/25/2010 - 11:46
User Badges:
  • Gold, 750 points or more

When you add speed dials like this, they will over flow to the 500S.  You have 5 buttons on the 525G.  Once you have used the 5 buttons, the next item will go to the 500S. 

gondange1 Mon, 01/25/2010 - 11:47
User Badges:

OK ! Many thanks Steven !

It is clear now.


gondange1 Tue, 01/26/2010 - 00:49
User Badges:

OK it works, but the numbering of each key of the 500S is a little fuzzy.

On my configuration, number 1 key for the speed-dial command is just after the last key definied with an internal number with the "button" command.

If I add another line in the button command, then all the speed-dial keys are shifted by 1.

This is odd !


Steven Smith Tue, 01/26/2010 - 08:14
User Badges:
  • Gold, 750 points or more

That is correct.  Speed dials like this just follow the next available button on the phone.  You can have line buttons on the 500S as well.  If using a 525, it would be button 6 as the first button on the 500s.  Speed dials just follow after all of the buttons.

nbitnevele Tue, 04/05/2011 - 06:55
User Badges:

Hello Stephen,

I have no experience with CLI. I'm always using CCA (beginner..).

When I'm using CCA (3.0.1), the settings will not be stored (after save and refresh, the most of the numbers are not saved...).

do you have expercience with this problem?

If not, do you have somewhere a complete script (from a to z), because I've total no experience with CLI ...

Thanks a lot.


This Discussion

Related Content