01-25-2010 03:02 PM - edited 03-15-2019 09:13 PM
We have CUCM 6.1.2 and wondering the best way (and if possible) to have our receptionist to be able to call all phones, and have them pick up with speaker after she dialed a specific extension. We had this similar setup on a different phone system, and want to recreate it on our new cisco gear.
01-25-2010 03:32 PM
CUCM does not include paging capabilities, this requires a 3rd party app.
There are plenty of recommendations on NetPro
Berbee Informacast is a very popular option.
Cistera Rapid Broadcast
IPCelerate
SynApps SA-Announce
There may be others, just search paging on NetPro
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-25-2010 07:10 PM
See if the following link about "IpPhoneMassanger" helps.
https://supportforums.cisco.com/message/1178628#1178628
There's another approche which will hopefully do what you're requesting,
1) Add a new line to the users phone.
2) Create a hount pilot which points to all of those lines.
3) Configure the lines in the users phone to autoanswer the calls
MK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide