cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
852
Views
0
Helpful
3
Replies

Monitoring issue on QPM 4.1

miradooRAND
Level 1
Level 1

Hello,

I'm Working on cisco QPM server. I finished all the configuration processes in workflow but when I launch the Monitoring service (in order to have a view of all configurations deployed on devices), an errors messages appears (attached files).

May Someone has already encountered this issue, what could be the reason? The soft is QPM 4.1.

Thanks alot for your response.

Miradoo

1 Accepted Solution

Accepted Solutions

CJasztrabTMW
Level 1
Level 1

Opened a TAC case for this issue.  It is a known bug with BUG ID of CSCsw80246.  The fix is to upgrade QPM to a newer version.  4.1.1 will suffice.

chris

View solution in original post

3 Replies 3

CJasztrabTMW
Level 1
Level 1

I'm also getting the same errors.

CJasztrabTMW
Level 1
Level 1

Opened a TAC case for this issue.  It is a known bug with BUG ID of CSCsw80246.  The fix is to upgrade QPM to a newer version.  4.1.1 will suffice.

chris

Hi Chris,

Thank you for your response and advice. Upgrading it to a higher version has solved the issue. Now it's running well. I used the 4.1.2 version.

Miradoo

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco