Solved: Monitoring issue on QPM 4.1

miradooRAND · ‎01-26-2010

Hello,

I'm Working on cisco QPM server. I finished all the configuration processes in workflow but when I launch the Monitoring service (in order to have a view of all configurations deployed on devices), an errors messages appears (attached files).

May Someone has already encountered this issue, what could be the reason? The soft is QPM 4.1.

Thanks alot for your response.

Miradoo

CJasztrabTMW · ‎02-02-2010

Opened a TAC case for this issue. It is a known bug with BUG ID of CSCsw80246. The fix is to upgrade QPM to a newer version. 4.1.1 will suffice.

chris

View solution in original post

CJasztrabTMW · ‎02-01-2010

I'm also getting the same errors.

CJasztrabTMW · ‎02-02-2010

Opened a TAC case for this issue. It is a known bug with BUG ID of CSCsw80246. The fix is to upgrade QPM to a newer version. 4.1.1 will suffice.

chris

miradooRAND · ‎02-09-2010

Hi Chris,

Thank you for your response and advice. Upgrading it to a higher version has solved the issue. Now it's running well. I used the 4.1.2 version.

Miradoo