CVR-X2-SPF 0n 3560E-12D

francisco_1 · ‎01-26-2010

Our 3560E does not recognized any of CVR-X2-SPF modules?

According to Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix, i think the module only works on specific IOS code?

Leo Laohoo · ‎01-26-2010

Minimum IOS requirement is 12.2(35)SE2.

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp134284

francisco_1 · ‎01-26-2010

for 3560E-12D it's 12.2(40)EX.

i thought so just wanted to clarify..

sachinraja · ‎01-26-2010

Hi Francisco

You should probably go for 12.2(53)SE which is the most recent IOS in this train..depending on the feature sets you have today (IP BASE, or universal, you can download the following IOS:

c3560e-ipbasek9-mz.122-53.SE.bin

Release Date: 15/Dec/2009

Minimum Memory: DRAM:128 MB Flash:64 MB

or

c3560e-universalk9-mz.122-53.SE.bin

Release Date: 15/Dec/2009

Minimum Memory: DRAM:128 MB Flash:64 MB

Hope this helps.. all the best

Raj

Leo Laohoo · ‎01-26-2010

12.2(40)EX? Try 12.2(40)SE or 12.2(44)SE.