01-26-2010 12:29 PM - edited 03-06-2019 09:27 AM
Our 3560E does not recognized any of CVR-X2-SPF modules?
According to Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix, i think the module only works on specific IOS code?
01-26-2010 12:47 PM
Minimum IOS requirement is 12.2(35)SE2.
01-26-2010 01:07 PM
for 3560E-12D it's 12.2(40)EX.
i thought so just wanted to clarify..
01-26-2010 01:22 PM
Hi Francisco
You should probably go for 12.2(53)SE which is the most recent IOS in this train..depending on the feature sets you have today (IP BASE, or universal, you can download the following IOS:
c3560e-ipbasek9-mz.122-53.SE.bin
Release Date: 15/Dec/2009
Minimum Memory: DRAM:128 MB Flash:64 MB
or
c3560e-universalk9-mz.122-53.SE.bin
Release Date: 15/Dec/2009
Minimum Memory: DRAM:128 MB Flash:64 MB
Hope this helps.. all the best
Raj
01-26-2010 02:02 PM
12.2(40)EX? Try 12.2(40)SE or 12.2(44)SE.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: