Solved: ASA 5510 CSC-SSM Config

ferraromj · ‎01-27-2010

I have a Cisco ASA 5510 with the CSC-SSM module installed. Is there a way to configure the CSC-SSM to block web sites but also allow specific users access to these sites?

Kureli Sankar · ‎01-28-2010

If you read the realease notes for 6.3 here:

http://www.ciscosystems.ch/en/US/docs/security/csc/csc63/release/notes/cscrn63.html

you will read the following:

Installing the CSC SSM Version 6.3.1172.0 Release

If you are running the CSC SSM 6.2 release, you must upgrade to CSC Version 6.2.1599.6 before you can install the GUI upgrade package, csc6.3.1172.0.pkg. Your current license and configuration will be preserved during the upgrade.

-KS

View solution in original post

Kureli Sankar · ‎01-27-2010

Yes, with the 6.3.1172.0.pkg you can do this by user based policy.

You can read about it here:

http://www.ciscosystems.ch/en/US/docs/security/csc/csc63/administration/guide/csc4.html#wp1063060

-KS

ferraromj · ‎01-28-2010

I'm running version 6.2.1599.0. Where can I get the software to upgrade to version 6.3.1172.0?

Kureli Sankar · ‎01-28-2010

code can be downloaded here: http://www.cisco.com/cgi-bin/tablebuild.pl/csc

6.3.1172.2.pkg was released earlier this week.

-KS

ferraromj · ‎01-28-2010

Thank you. I'll downlod the software and give it a try.

ferraromj · ‎01-28-2010

What version do I download first to get to version 6.3.1172.2.

Kureli Sankar · ‎01-28-2010

If you read the realease notes for 6.3 here:

http://www.ciscosystems.ch/en/US/docs/security/csc/csc63/release/notes/cscrn63.html

you will read the following:

Installing the CSC SSM Version 6.3.1172.0 Release

If you are running the CSC SSM 6.2 release, you must upgrade to CSC Version 6.2.1599.6 before you can install the GUI upgrade package, csc6.3.1172.0.pkg. Your current license and configuration will be preserved during the upgrade.

-KS

ferraromj · ‎01-28-2010

Thanks.

ferraromj · ‎02-04-2010

This resolved my issue.

Thanks