CME Outbound calling groups

Unanswered Question
Jan 27th, 2010
User Badges:


I have a CME system with different groups of extensions and phones.

Extensions 100-105 should use voice-port 0/0/0 - 0/0/3 for outbound calling

Extensions 200-205 should use voice-port 0/1/0 - 0/1/3 for outbound calling

and so on.

Inbound calling configurations I would hope would not be effected (like connection plar).

How do I accomplish this?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
paolo bevilacqua Thu, 01/28/2010 - 05:11
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

It is not a trivial configuration, basically requires called number manipulation or COr list applied to ephone DN.

I do not have a compelte config example here, but would be able to provide consultancy if you are interested.

Ovais Iqbal Thu, 01/28/2010 - 05:49
User Badges:
  • Cisco Employee,

You can accomplish this by using the COR list, if you have not worked with cor-lists before then you would need to understand it first otherwise you will end up troubleshooting it for hours.


You will need to play with Inbound/Outbound assignment of cor lists: In this example here Phone 1 will use the dial-peer 100, phone 2 will use dial-peer 200 and phone 3 can use all of them.

dial-peer cor custom
name pt-portone
name pt-porttwo

name pt-portthree

dial-peer cor list css-portone
member pt-portone

dial-peer cor list css-porttwo
member pt-porttwo

dial-peer cor list css-portthree

member pt-portthree

dial-peer cor list css-phoneone
member pt-portone

dial-peer cor list css-phonetwo
member pt-porttwo

dial-peer cor list css-phonethree

member pt-portone

member pt-porttwo

member pt-portthree

dial-peer voice 100 pots
destination-pattern 9[2-9]..[2-9]......
corlist outgoing css-portone
port 0/0/1:23

dial-peer voice 200 pots
destination-pattern 9[2-9]..[2-9]......

corlist outgoing css-porttwo
port 0/0/2:23

dial-peer voice 300 pots
destination-pattern 9[2-9]..[2-9]......

corlist outgoing css-portthree
port 0/0/3:23

ephone-dn 1 dual-line
cor incoming css-phoneone

ephone-dn 2 dual-line
cor incoming css-phonetwo

ephone-dn 3 dual-line

cor incoming css-phonethree

Hope it helps.



fruition3000 Thu, 03/04/2010 - 22:45
User Badges:

You answered his question and my month long question.  I appreciate the post without the "consultancy" lol.


This Discussion