3 IP adreses and Cisco ASA 5505

Unanswered Question
Jan 28th, 2010
User Badges:

Hallo!

I am a realy newone @Cisco.

I own Cisco ASA 5505.

We have one UTP Ethernet cable (RJ45) witch handles three IP adreses. One adress is fot IP telephony, second one for computer network and third is reserved for our public WEBserver, but it is no active now and will not be active about one year.

What could be the best way to configure ASA?

Static NAT?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Thu, 01/28/2010 - 03:24
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hallo!

I am a realy newone @Cisco.

I own Cisco ASA 5505.

We have one UTP Ethernet cable (RJ45) witch handles three IP adreses. One adress is fot IP telephony, second one for computer network and third is reserved for our public WEBserver, but it is no active now and will not be active about one year.

What could be the best way to configure ASA?

Static NAT?

Hi,


Check out the below links on ASA 5505 for basic understanding of configuration and scenario based configuartion.Hope it helps out your query !!


http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/int5505.html


http://www.cisco.com/en/US/docs/security/asa/asa72/getting_started/asa5505/quick/guide/dmz.html



Ganesh.H

matiss.jekabsons Thu, 01/28/2010 - 04:04
User Badges:

Thx for your reply.

For now i have configured one of the IPs with static NAT like

#static (inside,outside) a.b.c.d a.b.c.d netmask 255.255.255.255


And i was using exactly thouse manuals + Cisco Cookbook (O'Raylie)

For now i am trying to make a correct Dinamic NAT from 2nd public IP.

Ganesh Hariharan Thu, 01/28/2010 - 07:33
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Thx for your reply.

For now i have configured one of the IPs with static NAT like

#static (inside,outside) a.b.c.d a.b.c.d netmask 255.255.255.255


And i was using exactly thouse manuals + Cisco Cookbook (O'Raylie)

For now i am trying to make a correct Dinamic NAT from 2nd public IP.

Hi,


Yes that command will static nat  on pix and check out the below link for beginers on pix natting configuration with different scenarios hope that claers out your query.


http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml#multi_global


If helpful do rate the valauble post


Ganesh.H

Actions

This Discussion