drissbenattou Thu, 01/28/2010 - 04:25
User Badges:

Hello,


Go to http://www.cisco.com/cgi-bin/tablebuild.pl/CME-Locale


  • You must have an account on Cisco.com to access the Software Download Center.



  • Select your version of Cisco Unified CME.


  • Select the TAR file for the locale you want to install. Each TAR file contains locale files for a specific

language and country and uses the following naming convention: CME-locale-language_country-CMEversion


  • Download the TAR file to a TFTP server that is accessible to the Cisco Unified CME router. Each file

contains all the firmware required for all phone types supported by that version of Cisco Unified CME.

  • Use the archive tar command to extract the files to flash, slot 0, or an external TFTP server.

                 Router# archive tar /xtract source-url flash:/file-url


  • For example, to extract the contents of CME-locale-de_DE-4.0.2-2.0.tar from TFTP server 192.168.1.1

to router flash memory, use this command:

                  Router# archive tar /xtract tftp://192.168.1.1/cme-locale-de_DE-4.0.2-2.0.tar flash:



you have to add the following lines :


tftp-server flash:es-td-sccp.jar alias Spanish_Spain/td-sccp.jar
tftp-server flash:es-mk-sccp.jar alias Spanish_Spain/mk-sccp.jar
tftp-server flash:es-tc-sccp.jar alias Spanish_Spain/tc-sccp.jar



tftp-server flash:es-gp-sccp.jar alias Spanish_Spain/gp-sccp.jar
tftp-server flash:es-ipc-sccp.jar alias Spanish_Spain/ipc-sccp.jar
tftp-server flash:g3-tones.xml alias Spain/g3-tones.xml


Note : I don't know if the phone files are the same as what's mentionned in the top.

All of these files will be found in the Dowload Center


Regards


Driss

Actions

This Discussion