mtp on router questions

Unanswered Question
Jan 28th, 2010

I have some questions on MTP resource on a router

Router 1:

CCM Group Identifier: 500

Description: None

Binded Interface: None

Associated CCM Id: 1, Priority in this CCM Group: 1

Associated CCM Id: 2, Priority in this CCM Group: 2

Associated CCM Id: 3, Priority in this CCM Group: 3

Associated Profile: 2, Registration Name: MTP0022554e2510

Associated Profile: 1, Registration Name: MTPHardware

Associated Profile: 3, Registration Name: XCODE03

Registration Retries: 3, Registration Timeout: 10 sec

Keepalive Retries: 5, Keepalive Timeout: 30 sec

CCM Connect Retries: 3, CCM Connect Interval: 10 sec

Switchover Method: IMMEDIATE, Switchback Method: IMMEDIATE

Switchback Interval: 15 sec, Switchback Timeout: 0 sec

Signaling DSCP value: cs3, Audio DSCP value: ef

sess_id    conn_id      stype mode     codec   sport rport ripaddr

85005435   35303347     mtp   recvonly g711u   17598 0     0.0.0.0

85024084   35373061     mtp   recvonly g711u   19390 0     0.0.0.0

85042945   35440380     mtp   recvonly g711u   18198 0     0.0.0.0

85065228   35519747     mtp   recvonly g711u   17928 0     0.0.0.0

85209504   34038214     mtp   sendrecv g711u   16404 17680 10.20.152.77

85209504   34038205     mtp   sendrecv g711u   18010 17474 10.20.152.15

Why does it show no ip address? Does it mean MTP is hanging?

Also, MTP on router is hardware MTP,  How come it says software MTP on router??

Profile ID = 3, Service = MTP, Resource ID = 3 

Profile Description : 

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP   Status : ASSOCIATED

Resource Provider : NONE   Status : NONE

Number of Resource Configured : 500

Number of Resource Available : 500

Hardware Configured Resources : 0

Hardware Available Resources : 0

Software Resources : 500

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Can anyone please help me clarify these questions?

Thanks

Kind Regards,

Kadambari Beelwar

Sr. Voice Engineer

Nexus

Tele: 661-775-2469

Cell: 510-366-9717

Email: [email protected]

NTAC: 1-800-266-2003

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Thu, 01/28/2010 - 18:48

There are HW MTPs which use DSPs and SW IOS MTPs which uses router resources, there is nothing wrong.

I'd recommend you to read the conferencing and transconding guides available on CCO.


HTH


java


if this helps, please rate


www.cisco.com/go/pdihelpdesk

Actions

This Discussion