01-29-2010 05:36 AM
I have problem in LMS 3.2 with vrf capable or supported devices. I can't see only devices which have more than one OSPF process. Other devices with one OSPF process I see normally. Do you have any idea what's wrong? It doesn't depend on type of device. (2821, 3825, 3845)
Thanks!
Solved! Go to Solution.
01-30-2010 10:51 AM
How exactly do these devices show up in the readiness report? In order for a device to be VNM-supported, it must be of the correct hardware type. Those types can be found in NMSROOT/vnm/conf/metadata/vnmMetaData.xml. Additionally, it must also respond to the OID 1.3.6.1.3.118.1.1.1 with either a 0 or a positive integer. The device should also be managed by RME for complete support.
01-30-2010 10:51 AM
How exactly do these devices show up in the readiness report? In order for a device to be VNM-supported, it must be of the correct hardware type. Those types can be found in NMSROOT/vnm/conf/metadata/vnmMetaData.xml. Additionally, it must also respond to the OID 1.3.6.1.3.118.1.1.1 with either a 0 or a positive integer. The device should also be managed by RME for complete support.
01-31-2010 11:46 PM
HW is correct. Problem happend on the same platform, IOS, RAM (C3825-ADVENTERPRISEK9-M), Version 12.4(15)T8) diferrence is only in configuration OSPF processes. Device with two processes is not visible in VNM report. In other parts of LMS is visible.
02-01-2010 07:18 AM
What do you get when you walk 1.3.6.1.3.118.1.1.1 on this router?
02-02-2010 12:16 AM
02-02-2010 07:28 AM
How does this multi-OSPF 3825 show up in the report? Is it visible at all?
02-02-2010 11:28 PM
capable device is not visible in topology map and it's only one device from all network which is capable
supported device is visible in topology map
not-view is visible in topology map
in VNM report this multi-ospf device doesn't show
02-03-2010 12:53 PM
Okay, so the device isn't being managed by Campus Manager. Check Campus Manager > Admin > Data Collection, and make sure the device is n
ot excluded (or if you are statically including devices, make sure it is included). Then run a new Campus Data Collection from Campus Manager > Home. That should get the device to be managed.
02-16-2010 04:48 AM
Devices arenot excluded from CM. I deleted all devices from CS and rediscover from csv file. After it I reinited db. I can use report for all devices. I have descovered 869 devices. If I want to check devices and I use link on main page of CM in line Data Collection, I can see only 163 devices manually included. It could be problem. But I don't have idea what's wrong.
02-16-2010 12:05 PM
Is your server integrated with ACS?
02-16-2010 11:44 PM
no and never been
02-17-2010 08:08 AM
Post screenshots of your Device portal view and of the Campus Manager > Admin > Data Collection > Mode and Policy Settings.
02-18-2010 12:27 PM
02-18-2010 12:46 PM
It appears there may be a more serious issue. Post the output of the pdshow command as wel as the CMFOGSServer.log and CampusOGSServer.log.
02-19-2010 12:10 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide