Guideline for WISM and FWSM

Unanswered Question
Jan 30th, 2010
User Badges:

Hi Guys,

Currently, we have a Wism module in the Cat6500. We are planning for a FWSM in the same chassis for a proof-of-concept.

I have 2 questions that I'm hoping the expert here can shed some light.

1) Is there a best practice/guideline for the Wism's management interface/service-interface when we integrate the FWSM?

2) Is it still required to run vrf between the forwarding engine to the FWSM if the gateway of the wired vlans is not on the MSFC?

Any response is greatly appreciated.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion