01-30-2010 10:05 AM
Hello friends,
i have discovered switches and routers through CDP,how can i discover ASA while CDP does'nt work on ASA,
Thanks,
Solved! Go to Solution.
01-31-2010 09:56 PM
You need to make sure you have SNMP properly configured on the ASA, and that those same SNMP credentials are configured in Discovery. If a device shows up as being unreachable, then that means Discovery could not communicate with it via SNMP.
01-30-2010 11:38 AM
You will need to use one of the non-CDP Discovery modules for this. Many customers choose Ping Sweep. This will work for the ASA provided you allow ICMP.
01-30-2010 12:00 PM
Thanks,i will try i will come back to u
01-31-2010 10:49 AM
hello clarke,
I have enabled ping seep module for discovery but i could'nt found ASA it is unreacheable and found by systems,
thanks,
01-31-2010 09:56 PM
You need to make sure you have SNMP properly configured on the ASA, and that those same SNMP credentials are configured in Discovery. If a device shows up as being unreachable, then that means Discovery could not communicate with it via SNMP.
02-02-2010 10:58 PM
Also note that an ASA will always show up as an unconnected device in Campus Manager since it does not have CDP adjacency with any other device.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: