Enabling Antenna Gain On 1242 AP's

Unanswered Question
Jan 31st, 2010
User Badges:

If we are using 1242 access points with external antennas there is an option to configure the antenna gain in the WLC.

If we are using 2 * 5135 Antennas how we will configure the antenna gain. Antenna Gain is a factor of *0.5 dBi.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dancampb Mon, 02/01/2010 - 11:27
User Badges:
  • Cisco Employee,

Since that antenna has a gain of 3.5 you would configure 7.  You just enter twice what the antennas gain is.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode