cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2776
Views
0
Helpful
4
Replies

configuring ssl vpn on uc 560 with command line

TY08
Level 1
Level 1

guys,

does anyone have manual or instruction on how to configure ssl vpn?i already have ezvpn created, so when i tried using CCA. it gives me an error.

i need to create ssl vpn for spa525g phone.

let me know...

thank you

4 Replies 4

Steven Smith
Level 7
Level 7

You should be able to have both at the same time via CCA.  I don't have a guide that is UC specific, but there is how you configure SSL VPN's via CLI.

It has a lot of information, but it is very good.

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htwebvpn.html

so how do you configure the phone spa 525g?

does the ssl vpn gateway ip have to be different that the wan port ip?

I've just done this with a UC540.  Use the CCA 2.2.1 SSL VPN Wizard, but first make sure that the phone load is at 7-4-3.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: