02-02-2010 12:10 PM
I have an ACE 4710 appliance that has only a Linux kernel in its GRUB loader, no ACE image. Is anyone aware of how I could copy the image to the ACE via TFTP, USB drive, etc.?
02-02-2010 01:43 PM
Hi Joe,
Take a look at this link. It will show you how to copy and image to the ACE using the ACE-APPLIANCE-RECOVERY-IMAGE.bin. If it can't find this, then you may need to RMA the device.
Reformatting the Flash Memory
Hope this helps,
Sean
02-03-2010 06:25 AM
Thanks. At this point the appliance won't even boot to ACE software, so these commands aren't available to me. RMA is unfortunately not an option as this unit is out of support and used only in a test environment. Thanks for your help.
03-05-2010 01:49 AM
Hi, take a look at this topic, it might help.
You can take the flash card out and manage the files on another system...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide