I have a third party tool I'm trying to use and it wants to connect through SNMP to gather information. I can connect to my Cisco switches and routers but not my ASAs. They all use the same community 'pubs'.
DAYASA# sh run snmp-server
snmp-server host Inside 192.168.200.13 poll community pubs version 2c
snmp-server host Inside 192.168.200.53 community pubs
snmp-server location Day
no snmp-server contact
snmp-server community pubs
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
The 192.168.200.53 IP is my MARS unit and it talks to the ASA so I know SNMP works, at least, in part. The tool I'm trying to use isn't on a specific machine but shouldn't 'snmp-server community pubs' allow anything to connect?
what is the IP of your PC ?
YOu need to allow SNMP access from your PC to the ASA...
snmp-server host inside 192.168.x.x poll community public
where 192.168.x.x is the ip address of your PC...
refer to the following URL for more info:
Hope this helps.. all the best..