SA520 with multi vlan

Unanswered Question
Feb 2nd, 2010
User Badges:

Hi guys,

I am just doing some workup on a new sa520.  I have setup 2 additional vlan's.  When I plug in workstations into the vlan, I get a dhcp ip address, but there doesn't seem to be any way for me to configure dhcp settings for the additional 2 vlans.  Am I doing something wrong, or is it a failing with the user interface?

Thanks all!


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
jamccord Wed, 02/03/2010 - 06:29
User Badges:

Please advise what version firmware is on your SA500 appliance.

Steven Smith Wed, 02/03/2010 - 07:26
User Badges:
  • Gold, 750 points or more

Look under the multiple vlan subnets item.  It is under Networking.

Also, this is available starting in 1.0.39 firmware.  I would recommend using 1.1.21 firmware.  Note, either upgrade will cause a factory reset.

CHRIS YEO Wed, 02/10/2010 - 19:06
User Badges:


Thanks for your response.  I must have missed this when I was going through the settings.  I am using the latest firmware.


Steven Smith Thu, 02/11/2010 - 07:27
User Badges:
  • Gold, 750 points or more

I missed it one of the first time I was using the product as well.  Glad you have it now.


This Discussion

Related Content